www.design-reuse-embedded.com
Search Solutions  
OK
20 "Automotive-grade IP" IP

1
10G PHY for PCIe 3.0 in TSMC (16nm) for Automotive

The multi-lane DesignWare Multi-Protocol 10G PHY IP is part of Synopsys' high-performance multi-rate transceiver portfolio, meeting the growing needs for low-power consumption and low latency i...


2
Automotive-grade controllers for PCIe 2.0/1.0 supporting Endpoint, Root Complex, Switch Port, and Dual Mode applications

The complete silicon-proven DesignWare® IP solution, consisting of configurable digital controllers, PHYs, IP Prototyping Kits and verification IP, is designed to meet all required features of ...


3
Automotive-Grade DesignWare CSI-2 Device Controller IP
Integrating advanced peripherals such as multi-megapixel cameras and higher resolution screens into next generation devices brings new challenges to the industry in terms of power, time-to-market and ...

4
Automotive-Grade DesignWare MIPI CSI-2 Controller IP
The DesignWare® MIPI CSI-2 Host Controller IP is a fully verified and configurable controller IP that implements all protocol functions defined in the MIPI CSI-2 specification. The IP provides a high-...

5
Automotive-grade MIPI CSI-2 host/device controllers for high-speed serial interface between image processor and camera sensors

DesignWare® MIPI® IP solutions enable the interface between system-on-chips (SoCs), application processors, baseband processors and peripheral devices. Synopsys' broad portfolio of MIPI...


6
Controllers for CCIX 25G supporting Endpoint, Root Complex, Switch Port, and Dual Mode applications targeting automotive

Synopsys' complete DesignWare CCIX IP solution consisting of controller, PHY and verification IP, delivers data transfer rates up to 25Gbps and supports cache coherency for high-performance clo...


7
DDR and LPDDR 4/3/2 controllers for low power and high Reliability, Availability and Serviceability (RAS) targeting automotive

DesignWare® DDR Memory Interface IP is a family of complete system-level IP solutions for system-on-chips (SoCs) requiring an interface to one or more of the broad range of high-performance DDR...


8
DesignWare Controller IP for PCIe 5.0 Targeting Automotive
The configurable and scalable DesignWare Controller IP for PCI Express (PCIe) supports all required features of the PCI Express 5.0, 4.0, 3.1, 2.1, 1.1 and PHY Interface for PCI Express (PIPE) specifi...

9
DesignWare LPDDR4 multiPHY for GF22FDX Targeting Automotive

The DesignWare LPDDR4 multiPHY is Synopsys second generation physical (PHY) layer IP interface solution for ASICs, ASSPs, system-on-chips (SoCs) and system-in-package applications requiring high-...


10
DesignWare LPDDR5/4/4X Controller IP for Automotive
DesignWare® LPDDR5/4/4X Controller is a next generation controller optimized for power, latency, bandwidth, and area, supporting JEDEC standard LPDDR5, LPDDR4, and LPDDR4X SDRAMs.

11
LPDDR4 multiPHY V2 in TSMC (16nm) for Automotive

LPDDR4 multiPHY: Compatible with JEDEC standard LPDDR4 SDRAMs up to 4,267 Mbps - Maximum data rate is process technology dependent - Compatible with JEDEC standard DDR4 SDRAMs up to 3,200 Mbps - Co...


12
MIPI D-PHY in TSMC for Automotive (28nm, 16nm)

The demand for advanced multimedia features is pushing device manufacturers to integrate more advanced peripherals such as multi-megapixel cameras and larger screens. Integrating these capabilities...


13
Synopsys PCIe 4.0 IP on TSMC N7 for Automotive
The multi-channel DesignWare® PHY IP for PCI Express® 4.0 includes Synopsys’ high-speed, high-performance transceiver to meet today’s applications’ demands for higher bandwidth. The PHY provides a cos...

14
Adaptive Body-Bias IP for Automotive applications, enabling Process, Voltage & Temperature compensation to leverage FDSOI forward body-biasing capabilities
* All-in-one IP including body-bias voltage generator, low power sensors and adaptive control loop * Foundation IP independent * Ultra-wide voltage range * Support of Forward Body-Biasing * Automotive...

15
FlexNoC Functional Safety (FuSa) Option helps meet up to ISO 26262 ASIL B and D requirements against random hardware faults.
For complex SoCs in advanced process nodes, CPU duplication and memory protection logic are no longer sufficient to address all the metrics required to meet the more stringent ISO 26262 ASIL and IEC 6...

16
Automotive I2C Fail-Safe Interface (CDM5A/7A-ESD) - TSMC 16FFC,FF
Dolphin s interface IP for standard I/O and specialty I/O delivers ultra high performance for DDRx4, LPDDRx, DDR PHY, LVDS, LVPECL, I2C, PCI, SerDes, Xaui Ethernet, SPI4.2 and more.

17
Automotive I2C Fail-Safe Interface (CDM5A/7A-ESD)- TSMC 12nm 12FFC,FFC
Dolphin s interface IP for standard I/O and specialty I/O delivers ultra high performance for DDRx4, LPDDRx, DDR PHY, LVDS, LVPECL, I2C, PCI, SerDes, Xaui Ethernet, SPI4.2 and more.

18
Automotive MIPI A-PHY Sink IP (2-Lane)
The CL12912IP4000 is based on MIPI A-PHY interface specification announced in year 2020, targeting ultra-high-speed networking applications in ADAS and autonomous drive subsystems. It supports applica...

19
Automotive MIPI A-PHY Source IP - 1-Lane
The CL12911IP4000 is based on MIPI A-PHY interface specification announced in year 2020, targeting ultra-high-speed networking applications in ADAS and autonomous drive subsystems. It supports applica...

20
Automotive Qualified MTP in 0.18um Process
This IP is available in a 180-nanometer (nm) mixed signal 1.8V/5V CMOS and a 180nm BCD process.

 Back

Partner with us

List your Products

Suppliers, list and add your products for free.

More about D&R Privacy Policy

© 2024 Design And Reuse

All Rights Reserved.

No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used without the express written permission of Design And Reuse.